Kimba over at A Soft Place to Land is having a DIY Day!
The long awaited Dining room table makeover! Well its not COMPLETELY done- it still sits in the garage while the Poly-Eur ethane dries-that stuff is S-T-I-N-K-Y. I first tried staining with a dark espresso stain-well honey that DID not work-the wood on this table would not soak it in dark enough-unless I applied like 8 bazillion coats! So I went for option 2- painting! Spray painting that is. I found a nice Espresso Brown from Rusteloeum.
Liquid Sander- also known as Deglosser- this stuff is HIGHLY toxic. Apparently you have to dispose of the rags and gloves in water before you toss or it could automatically combust! and with our Texas temps being in the triple digits lately I knew I could end up on the 5 o’clock news!
I also hand sanded- most furniture you would only need to use the Liquid Sander and move on to painting- but this table had such a thick layer of gloss it took sanding too.
Wipe down with tack cloth and apply spray paint
Apply 2-3 coats of Min-wax Wipe on Poly in gloss finish. Allow it to dry 3 hours or more between coats. I also lightly sanded with steel wool between the coats.
Then there was the lesson learned part of this project. Spray painting a large surface area (i.e. the top of the table) causes huge, ugly, over spray marks-so the I-want-it-now side of me was going to just “live with it” but I decided to take the high road (meaning the long one). I re-sanded the newly painted and Poly’d top and hand painted it with Rusteloum’s paint in a can. I didnt realize they carry both paint in spray form and in quart size. I am so glad I did-what a difference!
After: (unfortunately I dont have it all set up in the house with all the fun summer tablescape yet) I am practicing patience and letting it fully cure before I dress it up.